How to Make a Metal Detector at Home ???

You Will Need :

• AM or AM/FM Radio
• Calculator
• Standard CD Case
• Some Velcro

Process :

     Carefully disassemble the CD case by removing the insert that holds the CD in place. On your radio, measure out an area centered on the back of the radio. Then cut a hook and loop piece of Velcro the same size. Stick one side of the Velcro to the back of the radio, and stick the other piece of Velcro to one side of the CD case. Then mount the radio. Repeat the same process with the calculator, and apply the Velcro to the other side of the CD case. Then mount the calculator. Make sure the radio is set to the AM band and turn it on. Now tune it on to the highest end of the AM band, but not directly at a broadcast station. Turn the volume up and all you should hear is static. If there is a broadcast station at the very high end of the AM band, get as close as you can so you're just hearing static. With the calculator on, start folding the CD case until you hear a loud tone. That tone is the electronic circuit in the calculator. It's producing a radio frequency signal that the AM radio is picking up. Now slowly open up the case again until you can barely hear the loud tone. Then start moving your radio and calculator close to a metal object, and you're hear the loud tone again. Now the next time you drop something valuable, get your homemade metal detector and find it!